Emissions and performance with diesel and waste lubricating oil: A fundamental study into cold start operation with a special focus on particle number size distribution: Energy Conversion and Management

TY - JOUR

T1 - Emissions and performance with diesel and waste lubricating oil: A fundamental study into cold start operation with a special focus on particle number size distribution

T2 - Energy Conversion and Management

AU - Zare, A.

AU - Bodisco, T.A.

AU - Verma, P.

AU - Jafari, M.

AU - Babaie, M.

AU - Yang, L.

AU - Rahman, M.M.

AU - Banks, A.

AU - Ristovski, Z.D.

AU - Brown, R.J.

AU - Stevanovic, S.

N1 - Cited By :14 Export Date: 17 February 2023 CODEN: ECMAD Correspondence Address: Zare, A.; Flow, Australia; email: [email protected] Funding details: Australian Research Council, ARC, LP110200158 Funding text 1: This research was supported by the Australian Research Council Linkage Projects funding scheme (project number LP110200158). Authors would like to acknowledge Prof. Jochen Mueller, Mr. Andrew Elder the software developer from DynoLog Dynamometer Pty Ltd and Mr. Noel Hartnett for their assistance. Funding text 2: This research was supported by the Australian Research Council Linkage Projects funding scheme (project number LP110200158 ). Authors would like to acknowledge Prof. Jochen Mueller, Mr. Andrew Elder the software developer from DynoLog Dynamometer Pty Ltd and Mr. Noel Hartnett for their assistance. References: Nanthagopal, K., Kishna, R.S., Atabani, A.E., Ala'a, H., Kumar, G., Ashok, B., A compressive review on the effects of alcohols and nanoparticles as an oxygenated enhancer in compression ignition engine (2020) Energy Convers Manage, 203; Rajak, U., Verma, T.N., A comparative analysis of engine characteristics from various biodiesels: numerical study (2019) Energy Convers Manage, 15 (180), pp. 904-923; Fonseca, J.M., Teleken, J.G., de Cinque, A.V., da Silva, C., Biodiesel from waste frying oils: methods of production and purification (2019) Energy Convers Manage, 15 (184), pp. 205-218; Aghbashlo, M., Tabatabaei, M., Mohammadi, P., Khoshnevisan, B., Rajaeifar, M.A., Pakzad, M., Neat diesel beats waste-oriented biodiesel from the exergoeconomic and exergoenvironmental point of views (2017) Energy Convers Manage, 15 (148), pp. 1-5; Tóth, O., Holló, A., Hancsók, J., Co-processing a waste fatty acid mixture and unrefined gas oil to produce renewable diesel fuel-blending components (2019) Energy Convers Manage, 1 (185), pp. 304-312; Shafiee, S., Topal, E., When will fossil fuel reserves be diminished? (2009) Energy Policy, 37 (1), pp. 181-189; Jiaqiang, E., Pham, M., Zhao, D., Deng, Y., Le, D., Zuo, W., Zhu, H., Zhang, Z., Effect of different technologies on combustion and emissions of the diesel engine fueled with biodiesel: a review (2017) Renew Sustain Energy Rev, 1 (80), pp. 620-647; Amid, S., Aghbashlo, M., Tabatabaei, M., Hajiahmad, A., Najafi, B., Ghaziaskar, H.S., Rastegari, H., Mohammadi, P., Effects of waste-derived ethylene glycol diacetate as a novel oxygenated additive on performance and emission characteristics of a diesel engine fueled with diesel/biodiesel blends (2020) Energy Convers Manage, 1 (203); Verma, P., Zare, A., Jafari, M., Bodisco, T.A., Rainey, T., Ristovski, Z.D., Brown, R.J., Diesel engine performance and emissions with fuels derived from waste tyres (2018) Sci Rep, 8 (1), pp. 1-3; Nabi, M.N., Zare, A., Hossain, F.M., Ristovski, Z.D., Brown, R.J., Reductions in diesel emissions including PM and PN emissions with diesel-biodiesel blends (2017) J Cleaner Prod, 10 (166), pp. 860-868; Zare, A., Nabi, M.N., Bodisco, T.A., Hossain, F.M., Rahman, M.M., Ristovski, Z.D., Brown, R.J., The effect of triacetin as a fuel additive to waste cooking biodiesel on engine performance and exhaust emissions (2016) Fuel, 15 (182), pp. 640-649; Zare, A., Bodisco, T.A., Nabi, M.N., Hossain, F.M., Rahman, M.M., Ristovski, Z.D., Brown, R.J., The influence of oxygenated fuels on transient and steady-state engine emissions (2017) Energy, 15 (121), pp. 841-853; Zare, A., Bodisco, T.A., Nabi, M.N., Hossain, F.M., Ristovski, Z.D., Brown, R.J., Engine performance during transient and steady-state operation with oxygenated fuels (2017) Energy Fuels, 31 (7), pp. 7510-7522; Zare, A., Bodisco, T., Nabi, N., Hossain, M., Rahman, M.M., Stuart, D., Ristovski, Z., Brown, R., (2015), pp. 48-51. , Impact of Triacetin as an oxygenated fuel additive to waste cooking biodiesel: transient engine performance and exhaust emissions. In: Proceedings of the 2015 Australian Combustion Symposium, Dec 2015. The Combustion Institute Australia and New Zealand Section; Nabi, M.N., Zare, A., Hossain, F.M., Bodisco, T.A., Ristovski, Z.D., Brown, R.J., A parametric study on engine performance and emissions with neat diesel and diesel-butanol blends in the 13-Mode European Stationary Cycle (2017) Energy Convers Manage, 15 (148), pp. 251-259; Fuentes, M.J., Font, R., Gómez-Rico, M.F., Martín-Gullón, I., Pyrolysis and combustion of waste lubricant oil from diesel cars: decomposition and pollutants (2007) J Anal Appl Pyrol, 79 (1-2), pp. 215-226; André, M., In actual use car testing: 70,000 kilometers and 10,000 trips by 55 French cars under real conditions (1991) SAE Trans, 1, pp. 65-72; Reiter, M.S., Kockelman, K.M., The problem of cold starts: a closer look at mobile source emissions levels (2016) Trans Res Part D: Transport Environ, 1 (43), pp. 123-132; André, J.M., Joumard, R., (2005), Modelling of cold start excess emissions for passenger cars: Institut National de Recherche sur les Transports et leur Securite (INRETS);; Zare, A., Bodisco, T.A., Nabi, M.N., Hossain, F.M., Ristovski, Z.D., Brown, R.J., A comparative investigation into cold-start and hot-start operation of diesel engine performance with oxygenated fuels during transient and steady-state operation (2018) Fuel, 15 (228), pp. 390-404; Zare, A., Nabi, M.N., Bodisco, T.A., Hossain, F.M., Rahman, M.M., Van, T.C., Ristovski, Z.D., Brown, R.J., Diesel engine emissions with oxygenated fuels: a comparative study into cold-start and hot-start operation (2017) J Cleaner Prod, 20 (162), pp. 997-1008; Roberts, A., Brooks, R., Shipway, P., Internal combustion engine cold-start efficiency: a review of the problem, causes and potential solutions (2014) Energy Convers Manage, 1 (82), pp. 327-350; Cao, Y., Operation and cold start mechanisms of internal combustion engines with alternative fuels. In: SAE Technical Paper; 2007 Aug 5; Giakoumis, E.G., Rakopoulos, C.D., Dimaratos, A.M., Rakopoulos, D.C., Exhaust emissions of diesel engines operating under transient conditions with biodiesel fuel blends (2012) Prog Energy Combust Sci, 38 (5), pp. 691-715; Sakunthalai, R.A., Xu, H., Liu, D., Tian, J., Wyszynski, M., Piaszyk, J., Impact of cold ambient conditions on cold start and idle emissions from diesel engines. In: SAE Technical Paper; 2014 Oct 13; Nam, E., Analysis of particulate matter emissions from light-duty gasoline vehicles in Kansas City (2008), US Environmental Protection Agency; Bielaczyc, P., Merkisz, J., Pielecha, J., A method of reducing the exhaust emissions from DI diesel engines by the introduction of a fuel cut off system during cold start. In: SAE Technical Paper; 2001 Oct 1; Lee, D.W., Johnson, J., Lv, J., Novak, K., Zietsman, J., Comparisons between vehicular emissions from real-world in-use testing and EPA moves estimation (2012), Texas Transportation Institute; Jiaqiang, E., Liu, G., Zhang, Z., Han, D., Chen, J., Wei, K., Gong, J., Yin, Z., Effect analysis on cold starting performance enhancement of a diesel engine fueled with biodiesel fuel based on an improved thermodynamic model (2019) Appl Energy, 1 (243), pp. 321-335; Deng, Y., Liu, H., Zhao, X., Jiaqiang, E., Chen, J., Effects of cold start control strategy on cold start performance of the diesel engine based on a comprehensive preheat diesel engine model (2018) Appl Energy, 15 (210), pp. 279-287; Mitchell, B.J., Zare, A., Bodisco, T.A., Nabi, M.N., Hossain, F.M., Ristovski, Z.D., Brown, R.J., Engine blow-by with oxygenated fuels: a comparative study into cold and hot start operation (2017) Energy., 1 (140), pp. 612-624; Will, F., Boretti, A., A new method to warm up lubricating oil to improve the fuel efficiency during cold start (2011) SAE Int J Engines, 4 (1), pp. 175-187; Samhaber, C., Wimmer, A., Loibner, E., Modeling of engine warm-up with integration of vehicle and engine cycle simulation. In: SAE Technical Paper; 2001 May 14; Van, T.C., Zare, A., Jafari, M., Bodisco, T.A., Surawski, N., Verma, P., Suara, K., Brown, R.J., Effect of cold start on engine performance and emissions from diesel engines using IMO-Compliant distillate fuels (2019) Environ Pollut, 255; Kittelson, D.B., Watts, W.F., Johnson, J.P., Thorne, C., Higham, C., Payne, M., Goodier, S., Pickles, D., Effect of fuel and lube oil sulfur on the performance of a diesel exhaust gas continuously regenerating trap (2008) Environ Sci Technol, 42 (24), pp. 9276-9282; Krahl, J., Bünger, J., Schröder, O., Munack, A., Knothe, G., Exhaust emissions and health effects of particulate matter from agricultural tractors operating on rapeseed oil methyl ester (2002) J Am Oil Chem Soc, 79 (7), pp. 717-724; Martini, G., Giechaskiel, B., Dilara, P., Future European emission standards for vehicles: the importance of the UN-ECE Particle Measurement Programme (2009) Biomarkers, 14 (sup1), pp. 29-33; Giechaskiel, B., Lähde, T., Drossinos, Y., Regulating particle number measurements from the tailpipe of light-duty vehicles: the next step? (2019) Environ Res, 1 (172), pp. 1-9; Uriondo, Z., Gabiña, G., Basurko, O.C., Clemente, M., Aldekoa, S., Martin, L., Waste lube-oil based fuel characterization in real conditions. Case study: bottom-trawl fishing vessel powered with medium speed diesel engine (2018) Fuel, 1 (215), pp. 744-755; Bhaskar, T., Uddin, M.A., Muto, A., Sakata, Y., Omura, Y., Kimura, K., Kawakami, Y., Recycling of waste lubricant oil into chemical feedstock or fuel oil over supported iron oxide catalysts (2004) Fuel, 83 (1), pp. 9-15; Arpa, O., Yumrutaş, R., Argunhan, Z., Experimental investigation of the effects of diesel-like fuel obtained from waste lubrication oil on engine performance and exhaust emission (2010) Fuel Process Technol, 91 (10), pp. 1241-1249; Park, H., Shin, J., Bae, C., Spray and combustion of diesel fuel under simulated cold-start conditions at various ambient temperatures. In: SAE Technical Paper; 2017 Sep 4; Nabi, M.N., Zare, A., Hossain, F.M., Rahman, M.M., Bodisco, T.A., Ristovski, Z.D., Brown, R.J., Influence of fuel-borne oxygen on European stationary cycle: diesel engine performance and emissions with a special emphasis on particulate and NO emissions (2016) Energy Convers Manage, 1 (127), pp. 187-198; Bodisco, T., Zare, A., Practicalities and driving dynamics of a real driving emissions (RDE) Euro 6 regulation homologation test (2019) Energies., 12 (12), p. 2306; Nabi, N., Zare, A., Hossain, M., Rahman, M.M., Stuart, D., Ristovski, Z., Brown, R., (2015), pp. 64-67. , Formulation of new oxygenated fuels and their influence on engine performance and exhaust emissions. In: Proceedings of the 2015 Australian Combustion Symposium. The Combustion Institute Australia and New Zealand Section; Odibi, C., Babaie, M., Zare, A., Nabi, M.N., Bodisco, T.A., Brown, R.J., Exergy analysis of a diesel engine with waste cooking biodiesel and triacetin (2019) Energy Convers Manage, 15 (198); Chu-Van, T., Ristovski, Z., Pourkhesalian, A.M., Rainey, T., Garaniya, V., Abbassi, R., Jahangiri, S., Yang, L., On-board measurements of particle and gaseous emissions from a large cargo vessel at different operating conditions (2018) Environ Pollut, 1 (237), pp. 832-841; Bodisco, T., Brown, R.J., Inter-cycle variability of in-cylinder pressure parameters in an ethanol fumigated common rail diesel engine (2013) Energy., 1 (52), pp. 55-65; Bodisco, T., Tröndle, P., Brown, R.J., Inter-cycle variability of ignition delay in an ethanol fumigated common rail diesel engine (2015) Energy, 1 (84), pp. 186-195; Li, H., Andrews, G.E., Savvidis, D., Daham, B., Ropkins, K., Bell, M., Tate, J., Study of thermal characteristics and emissions during cold start using an on-board measuring method for modern SI car real world urban driving (2009) SAE Int J Engines, 1 (1), pp. 804-819; Roberts, A., Brooks, R., Shipway, P., Internal combustion engine cold-start efficiency: a review of the problem, causes and potential solutions (2014) Energy Convers Manage, 1 (82), pp. 327-350; Andrews, G.E., Ounzain, A.M., Li, H., Bell, M., Tate, J., Ropkins, K., The use of a water/lube oil heat exchanger and enhanced cooling water heating to increase water and lube oil heating rates in passenger cars for reduced fuel consumption and CO2 emissions during cold start. In: SAE Technical Paper; 2007 Jul 23; Jarrier, L., Champoussin, J.C., Yu, R., Gentile, D., Warm-up of a DI diesel engine: experiment and modeling. In: SAE Technical Paper; 2000 Mar 6; Trapy, J.D., Damiral, P., An investigation of lubricating system warm-up for the improvement of cold start efficiency and emissions of SI automotive engines (1990) SAE Trans, 1, pp. 1635-1645; Li, H., Andrews, G.E., Savvidis, D., Daham, B., Ropkins, K., Bell, M., Tate, J., Study of thermal characteristics and emissions during cold start using an on-board measuring method for modern SI car real world urban driving (2009) SAE Int J Engines, 1 (1), pp. 804-819; Kunze, K., Wolff, S., Lade, I., Tonhauser, J., A systematic analysis of CO2-reduction by an optimized heat supply during vehicle warm-up. In: SAE Technical Paper; 2006 Apr 3; Verma, P., Stevanovic, S., Zare, A., Dwivedi, G., Chu Van, T., Davidson, M., Rainey, T., Ristovski, Z.D., An overview of the influence of biodiesel, alcohols, and various oxygenated additives on the particulate matter emissions from diesel engines (2019) Energies, 12 (10), p. 1987; World Health Organization, Review of evidence on health aspects of air pollution—REVIHAAP project (2013), WHO Regional Office for Europe Copenhagen, Denmark; Stevanovic, S., Vaughan, A., Hedayat, F., Salimi, F., Rahman, M.M., Zare, A., Brown, R.A., Wang, X., Oxidative potential of gas phase combustion emissions-An underestimated and potentially harmful component of air pollution from combustion processes (2017) Atmos Environ, 1 (158), pp. 227-235; Vaughan, A., Stevanovic, S., Rahman, M., Zare, A., Miljevic, B., Ristovski, Z., Bowman, R., Yang, I., N-acetyl cysteine (NAC) intervention attenuates the effects of diesel and biodiesel emission exposure on human bronchial epithelial cells, 16HBE, at air-liquid interface. 2016. PA4002; Hedayat, F., Stevanovic, S., Milic, A., Miljevic, B., Nabi, M.N., Zare, A., Bottle, S.E., Ristovski, Z.D., Influence of oxygen content of the certain types of biodiesels on particulate oxidative potential (2016) Sci Total Environ, 1 (545), pp. 381-388; Vaughan, A., Stevanovic, S., Morrison, L.E., Pourkhesalian, A.M., Rahman, M.M., Zare, A., Miljevic, B., Fong, K.M., Removal of organic content from diesel exhaust particles alters cellular responses of primary human bronchial epithelial cells cultured at an air-liquid interface (2015) J Environ Anal Toxicol, 5 (5); Vaughan, A., Stevanovic, S., Morrison, L., Pourkhesalian, A., Rahman, M., Zare, A., Miljevic, B., Bowman, R., Organic content of diesel emission particles and human bronchial epithelial cell responses to primary and aged diesel emissions (2015) Respirology, 20, p. 74; Vaughan, A., Stevanovic, S., Banks, A.P., Zare, A., Rahman, M.M., Bowman, R.V., Fong, K.M., Yang, I.A., The cytotoxic, inflammatory and oxidative potential of coconut oil-substituted diesel emissions on bronchial epithelial cells at an air-liquid interface (2019) Environ Sci Pollut Res, 26 (27), pp. 27783-27791; https://www.delphi.com/innovations#emissionstandards, Delphi. (2018, 15/04/2019). Worldwide emissions standards. Available:; Jiaqiang, E., Zhao, X., Liu, G., Zhang, B., Zuo, Q., Wei, K., Li, H., Gong, J., Effects analysis on optimal microwave energy consumption in the heating process of composite regeneration for the diesel particulate filter (2019) Appl Energy, 254; Jiaqiang, E., Zhao, X., Xie, L., Zhang, B., Chen, J., Zuo, Q., Han, D., Zhang, Z., Performance enhancement of microwave assisted regeneration in a wall-flow diesel particulate filter based on field synergy theory (2019) Energy, 15 (169), pp. 719-729; Zhao, X., Jiaqiang, E., Zhang, Z., Chen, J., Liao, G., Zhang, F., Leng, E., Hu, W., A review on heat enhancement in thermal energy conversion and management using Field Synergy Principle (2020) Appl Energy, 257; Jiaqiang, E., Zhao, M., Zuo, Q., Zhang, B., Zhang, Z., Peng, Q., Han, D., Deng, Y., Effects analysis on diesel soot continuous regeneration performance of a rotary microwave-assisted regeneration diesel particulate filter (2020) Fuel, 260; Kittelson, D., Watts, W., Johnson, J., Diesel aerosol sampling methodology–CRC E-43. Final report (2002), Coordinating Research Council; Peckham, M.S., Finch, A., Campbell, B., Price, P., Davies, M.T., Study of particle number emissions from a turbocharged gasoline direct injection (GDI) engine including data from a fast-response particle size spectrometer. In: SAE Technical Paper; 2011 Apr 12; Verma, P., Pickering, E., Savic, N., Zare, A., Brown, R., Ristovski, Z., Comparison of manual and automatic approaches for characterisation of morphology and nanostructure of soot particles (2019) J Aerosol Sci, 1 (136), pp. 91-105; Kittelson, D.B., Watts, W.F., Johnson, J.P., Rowntree, C.J., Goodier, S.P., Payne, M.J., Preston, W.H., Goersmann, C., Driving down on-highway particulate emissions. In: SAE Technical Paper; 2006 Apr 3; Kittelson, D.B., Watts, W.F., Johnson, J.P., Rowntree, C., Payne, M., Goodier, S., Warrens, C., Goersmann, C., On-road evaluation of two diesel exhaust aftertreatment devices (2006) J Aerosol Sci, 37 (9), pp. 1140-1151; Jafari, M., Verma, P., Bodisco, T.A., Zare, A., Surawski, N.C., Borghesani, P., Stevanovic, S., Milic, A., Multivariate analysis of performance and emission parameters in a diesel engine using biodiesel and oxygenated additive (2019) Energy Convers Manage, 201; Kittelson, D.B., Arnold, M., Watts, W.F., Review of diesel particulate matter sampling methods (1999), University of Minnesota, Department of Mechanical Engineering, Center for Diesel Research Minneapolis, Minnesota, USA; Wang, Y., Xiao, F., Zhao, Y., Li, D., Lei, X., Study on cycle-by-cycle variations in a diesel engine with dimethyl ether as port premixing fuel (2015) Appl Energy, 1 (143), pp. 58-70; Bittle, J., Knight, B., Jacobs, T., Biodiesel effects on cycle-to-cycle variability of combustion characteristics in a common-rail medium-duty diesel engine. In: SAE Technical Paper; 2010 Apr 12; Yang, L.P., Bodisco, T.A., Zare, A., Marwan, N., Chu-Van, T., Brown, R.J., Analysis of the nonlinear dynamics of inter-cycle combustion variations in an ethanol fumigation-diesel dual-fuel engine (2019) Nonlinear Dyn, 95 (3), pp. 2555-2574; Jafari, M., Verma, P., Zare, A., Bodisco, T.A., Ristovski, Z., Brown, R.J., (2018), Investigation of diesel engine combustion instability using a dynamical systems approach;; Jääskeläinen, H., Khair, M., (2016), DieselNet Technology Guide, Combustion in diesel engines;UR - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85081032193&doi=10.1016%2fj.enconman.2020.112604&partnerID=40&md5=a722e56f329cdee5d7542e08a6fbb05a

PY - 2020

Y1 - 2020

KW - Cold-start

KW - Engine warm up

KW - Particle size distribution

KW - Particulate matter

KW - PN

KW - Waste lubriacating oil

KW - Cobalt alloys

KW - Diesel engines

KW - Efficiency

KW - Friction

KW - Fuels

KW - Light transmission

KW - Lubricating oils

KW - Particle size

KW - Particle size analysis

KW - Particles (particulate matter)

KW - Particulate emissions

KW - Size distribution

KW - Waste incineration

KW - Cold start

KW - Indicated mean effective pressure

KW - Maximum rate of pressure rise

KW - Particle number size distribution

KW - Particulate Matter

KW - Particulate matter emissions

KW - Particulate size distribution

KW - Warm up

KW - Lubrication

U2 - 10.1016/j.enconman.2020.112604

DO - 10.1016/j.enconman.2020.112604

M3 - Article

SN - 0196-8904

VL - 209

JO - Energy Conversion and Management

JF - Energy Conversion and Management

ER -