Skip to main navigation Skip to search Skip to main content

Laboratory investigation of primary wave velocities and constrained moduli of glauconite sand under anisotropic stress states

  • Shuyin Feng
  • , Parham Reyhanianasl
  • , Mingnan Li
  • , Chris Brandish-Lowe
  • , Toby Masters
  • , Erdin Ibraim
  • , Tingfa Liu
  • , Andrea Diambra
  • Geoquip Marine, UK
  • University of Bristol

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Glauconitic materials pose significant challenges for the installation and design of offshore pile foundations. Evaluation of the primary wave velocities (VP) of geo-materials is an essential step for their geophysical and dynamic characterisation. The extender element test method measures the VP of geo-materials by applying a high-frequency pulse excitation, typically between 5 and 50 kHz. Recent advancement in the extender element test proves its effectiveness for utilization in both laboratory research and industrial applications. In this study, an advanced dynamic triaxial apparatus equipped with a pair of combined bender/extender element inserts was used to measure the VP of glauconitic sand. The glauconite samples were subjected to the designed deviatoric stress paths to investigate the effects of anisotropic stress states on VP. All samples were prepared and tested in dry states to avoid the mask signal effects from pore water. Detailed information of the specimen density and straining under the applied isotropic and anisotropic stress paths was acquired by high-resolution local strain sensors. The effects of stress anisotropy were highlighted by normalising the measured small strain constrained moduli (Mmax) with respect to a void ratio function and their corresponding values at isotropic stress states. The crushing potential of glauconitic sand has also been assessed. The results indicate that at a given effective mean stress p’, the normalised Mmax of the tested samples increased with the applied stress ratio (q/p’), while no significant crushing has been observed in the samples tested under mean effective stress level up to 600 kPa.
Original languageEnglish
Title of host publicationProceedings of the 21st International Conferences on Soil Mechanics and Geotechnical Engineering
DOIs
Publication statusPublished (VoR) - 19 Jun 2026
Eventthe 21st International Conference on Soil Mechanics and Geotechnical Engineering - Vienna, Austria
Duration: 10 Jun 2026 → 19 Jun 2026

Conference

Conferencethe 21st International Conference on Soil Mechanics and Geotechnical Engineering
Country/TerritoryAustria
CityVienna
Period10/06/26 → 19/06/26

Fingerprint

Dive into the research topics of 'Laboratory investigation of primary wave velocities and constrained moduli of glauconite sand under anisotropic stress states'. Together they form a unique fingerprint.

Cite this